致密砂岩油藏能量补充方式评价及优化

针对致密砂岩油藏大规模体积压裂开发后能量补充困难的问题,利用自主设计制作的大型人造三维岩心物理模型和物理模拟实验舱,开展致密砂岩油藏能量补充方式优化研究。实验结果表明:致密砂岩油藏压裂开发过程中,地层能量损耗严重,采取注水或注气的方式可有效进行能量补充;地层中裂缝规模越大,越有利于原油渗流,后续补充能量的传播范围越广,有助于进一步提高原油采收率;从提高驱油效率和扩大波及系数方面优选吞吐渗吸介质,CO₂均优于活性水,CO₂吞吐开发在矿场试验中取得了显著的增油效果,因此,CO₂吞吐作为一种有效的能量补充方式在致密油开发中展现了良好的应用前景。该文分析了致密砂岩储层水平井压裂开发的渗流规律,优选出致密砂岩储层大规模压裂开发后最佳渗吸介质,可为致密砂岩油藏开发设计提供重要的理论依据。     

建筑结构控制爆破拆除的力学分析与应用

应用运动学、动力学理论建立建(构)筑物控爆坍落过程的力学模型,进而研究在非定常约束条件下坍落结构的力学特征。首次提出了采用延时起爆技术时,非自由质点系及其广义坐标应是建立在每一段位上的瞬间虚位移。在此基础上,分析求解运动过程中时控单元的质点自由度,为精确选定爆破部位及时序提供了设计理论和计算依据。同时,结合振动理论,将控爆时差、结构载荷分布调制为振动系统,形成坍落结构梁板单元的强迫振动,充分实现在运动中进一步解体、破碎其自身结构,并形成具有明显缓冲效果的下落过程。应用实践结果证明力学分析是正确的,为工程结构爆破拆除计算机辅助设计及动态模拟技术的有效应用奠定了基础。     

基于FLAC3D的破碎围岩巷道支护效果分析

为了解破碎围岩分别采用锚杆支护、锚喷支护以及锚喷+锚索耦合三种支护方式下的支护效果,进而为破碎围岩巷道选择合理的支护方式提供参考。通过借助FLAC^3D软件建立数值模型,分析不同支护条件下的破碎围岩巷道位移量、应力分布以及塑性区的时空演化特征。结果表明,采用锚喷+锚索耦合支护时,可以较好的控制巷道围岩的位移量、减小应力集中效应、缩小塑性区的影响范围。     

基于VMD和BSA-KELM的高陡边坡位移预测模型研究

边坡位移的时间序列曲线存在复杂的非线性特性,传统的预测模型精度不足以满足预测要求。为此提出了基于变分模态分解的鸟群优化-核极限学习机的预测模型,并用于河北省某水泥厂的边坡位移预测。该方法首先采用VMD把边坡位移序列分解为一系列的有限带宽的子序列,再对各子序列分别采用相空间重构并用核极限学习机预测,采用鸟群算法优化相空间重构的嵌入维度和KELM中惩罚系数和核参数三个数值,以取得最优预测模型。最后将各个子序列预测值叠加,得到边坡位移的最终预测值。结果表明：和KELM、BSA-KELM、EEMD-BSA-KELM模型相比,基于VMD的BSA-KELM预测精度更高,为边坡位移的预测提供一种有效的方法。     

Control of viscous fingering and mixing in miscible displacements with time-dependent rates

In miscible displacements encountered in enhanced oil recovery processes, the unfavorable viscosity contrast between injected solvent and oil usually leads to viscous fingering (VF), a hydrodynamic instability which may result in a lower sweep efficiency and oil recovery. This phenomenon can be observed in a wide range of flows in subsurface porous media. This study examined a simple cyclic time-dependent displacement rate and its effects on the onset and longer development of VF. It is found that such varying displacement rate can either stabilize or destabilize VF, depending on the cycle period, amplitude, and displacement scenarios. The most important mechanism is that such time-dependent rate can effectively change the competition between convection (destabilizing effect) and dispersion (stabilizing effect). This is different from the widely used constant injection rate where the flow instability is actually determined by the Peclet number and mobility contrast for a given scenario. This study therefore provided a new aspect to control VF, either enhance or reduce, with low additional costs. It is therefore both scientifically and practically important for a wide range of flows in subsurface porous media. © 2017 American Institute of Chemical Engineers AIChE J, 65: 360–371, 2019     

核磁共振方法研究油水过渡带驱替特征

目前,利用常规手段难以对低含油饱和度油水过渡带进行开采,利用气驱及化学驱方式开采仍具有开发潜力,但对于不同类型的油水过渡带,其开发机理不明确。开展4组天然岩心驱替实验,利用核磁共振技术研究不同类型油水过渡带中剩余油的启动机理和主要分布状态,在此基础上研究油水过渡带的开发特征。实验结果表明,气驱开发方式更适用于低渗岩心;化学驱的乳化及降低表面张力作用对小孔隙中剩余油有较好的动用程度,提高采收率效果显著。     

Characterization and actuation behavior of SPS/SGO ion exchange polymer actuator based on PEDOT: PSS/SGO composite electrode

ABSTRACT

This paper studied the fabrication of new hybrid-type poly(3,4- ethylene dioxythiophene) (PEDOT)/sulfonated graphene oxide electrode-based polymer actuator produced by film casting method. Sulfonated Poly(1,4-phenylene ether-ether sulfone) (SPS) ion-exchange polymer membrane-based ionic polymer composite actuators were fabricated using the different concentration of SGO. The characterization and actuation were demonstrated. By altering SGO concentration, four different SPS based membrane actuators were analyzed. The effects of SGO concentration on the morphology, proton conductivity, ion exchange capacity, and water uptake capability were studied. The maximum tip displacement and force by varying concentration of SGO were evaluated for the actuation performance.     

酸性废水中As(Ⅲ)、Cu(Ⅱ)与铁粉的反应行为

在Fe-As(Ⅲ)-Cu(Ⅱ)-H₂O体系中, 研究了酸性废水中As(Ⅲ)、Cu(Ⅱ)与金属铁粉的反应行为, 考察了反应过程中As在气、液、固三相中的分配比。结果表明, As(Ⅲ)和Cu(Ⅱ)离子被Fe还原为单质As和Cu后, As、Cu进一步结合成Cu₅As₂等金属间化合物, 从而促进As(Ⅲ)沉淀反应的发生, 且无AsH3生成。在反应时间40min、铁粉过量系数1.2、溶液初始pH=0.0、温度40 ℃、Cu/As摩尔比1.0条件下, As在气、液、固三相中的分配比分别为0、20.7%和79.3%, 沉砷率为79.3%。